top of page
Search

Metric Thread Pitch Chart and Selection Guide

Writer: MSTC
MSTC
6 hours ago
1 min read

Metric threads are identified by nominal diameter and pitch. M8 X 1.25 X 30 means an 8 mm nominal diameter, a 1.25 mm distance between thread crests and a 30 mm fastener length.

Coarse and fine pitch

Coarse pitch is the common general-purpose choice and is usually more tolerant of handling and assembly. Fine pitch provides more threads per unit length and can be useful where adjustment, reduced thread depth or specific strength requirements matter.

Measure before ordering

Use a metric thread-pitch gauge whenever possible. Measure the outside diameter with calipers, identify the pitch, then measure length using the convention for the head style.

Avoid common mistakes

Do not confuse pitch with threads per inch. Do not assume every diameter uses only one pitch. Verify left-hand threads, tapered threads and application-specific forms separately.

Need help selecting a metric fastener?

Metric Screw & Tool Company stocks DIN, ISO, JIS and MST metric fasteners for industrial maintenance, repair and manufacturing. Search the product categories or contact us with the specification, size, material, finish and quantity you need.

 
 
 

Recent Posts

See All
DIN to ISO Metric Fastener Equivalency Guide

Use this guide as a starting point when replacing a DIN fastener with an ISO specification. Dimensional differences can exist even when two standards describe a similar fastener, so verify the drawing

 
 
 
Metric Stainless Steel Fasteners: A2 and A4

A2 and A4 are widely used stainless-steel designations for metric fasteners. Selection should consider corrosion exposure, temperature, strength, galling and compatibility with the surrounding materia

 
 
 

Comments


bottom of page