top of page
Search

Metric Screw Drive Styles: Hex Socket, Phillips, Pozidriv and Six-Lobe

Writer: MSTC
MSTC
6 hours ago
1 min read

The correct driver must match the fastener recess. A tool that appears to fit can still damage the recess, reduce torque transfer and make later removal difficult.

Hex socket

Hex socket drives are common on socket head cap screws, button heads, flat heads and set screws. Use the correct metric hex key rather than a close inch size.

Phillips and Pozidriv

Phillips and Pozidriv recesses are different. Pozidriv typically has additional identifying ribs and is designed for a matching driver. Mixing them can cause cam-out and recess damage.

Six-lobe drive

Internal six-lobe drives are often called Torx-style drives. Use the specified size and confirm whether the product uses a standard internal drive, security feature or another variant.

Need help selecting a metric fastener?

Metric Screw & Tool Company stocks DIN, ISO, JIS and MST metric fasteners for industrial maintenance, repair and manufacturing. Search the product categories or contact us with the specification, size, material, finish and quantity you need.

 
 
 

Recent Posts

See All
Metric Thread Pitch Chart and Selection Guide

Metric threads are identified by nominal diameter and pitch. M8 X 1.25 X 30 means an 8 mm nominal diameter, a 1.25 mm distance between thread crests and a 30 mm fastener length.

 
 
 
DIN to ISO Metric Fastener Equivalency Guide

Use this guide as a starting point when replacing a DIN fastener with an ISO specification. Dimensional differences can exist even when two standards describe a similar fastener, so verify the drawing

 
 
 
Metric Stainless Steel Fasteners: A2 and A4

A2 and A4 are widely used stainless-steel designations for metric fasteners. Selection should consider corrosion exposure, temperature, strength, galling and compatibility with the surrounding materia

 
 
 

Comments


bottom of page