top of page
Search

DIN to ISO Metric Fastener Equivalency Guide

Writer: MSTC
MSTC
6 hours ago
1 min read

Use this guide as a starting point when replacing a DIN fastener with an ISO specification. Dimensional differences can exist even when two standards describe a similar fastener, so verify the drawing, material, property class, finish, thread pitch and application before substitution.

Common equivalencies

Frequently encountered relationships include DIN 912 with ISO 4762 socket head cap screws, DIN 933 with ISO 4017 fully threaded hex head screws, DIN 931 with ISO 4014 partially threaded hex head screws, DIN 934 with ISO 4032 hex nuts, and DIN 125 with ISO 7089 or ISO 7090 flat washers.

Why the numbers are not always interchangeable

An ISO successor may change head dimensions, wrench size, washer series, tolerances or preferred sizes. Treat an equivalency as a cross-reference for research, not automatic permission to substitute.

Ordering checklist

Confirm diameter, pitch, length, thread coverage, drive, head style, material, property class, coating and quantity. For critical applications, compare the applicable standard drawings or request assistance before ordering.

Need help selecting a metric fastener?

Metric Screw & Tool Company stocks DIN, ISO, JIS and MST metric fasteners for industrial maintenance, repair and manufacturing. Search the product categories or contact us with the specification, size, material, finish and quantity you need.

 
 
 

Recent Posts

See All
Metric Thread Pitch Chart and Selection Guide

Metric threads are identified by nominal diameter and pitch. M8 X 1.25 X 30 means an 8 mm nominal diameter, a 1.25 mm distance between thread crests and a 30 mm fastener length.

 
 
 
Metric Stainless Steel Fasteners: A2 and A4

A2 and A4 are widely used stainless-steel designations for metric fasteners. Selection should consider corrosion exposure, temperature, strength, galling and compatibility with the surrounding materia

 
 
 

Comments


bottom of page