top of page
Search

Metric Stainless Steel Fasteners: A2 and A4

Writer: MSTC
MSTC
6 hours ago
1 min read

A2 and A4 are widely used stainless-steel designations for metric fasteners. Selection should consider corrosion exposure, temperature, strength, galling and compatibility with the surrounding materials.

A2 stainless steel

A2 is a common general-purpose stainless choice for many indoor and mildly corrosive environments. It offers useful corrosion resistance but is not the preferred solution for every chemical, marine or chloride exposure.

A4 stainless steel

A4 generally provides improved resistance in more aggressive environments, particularly where chlorides may be present. Actual suitability still depends on the complete service conditions.

Assembly guidance

Stainless threads can gall. Clean components, correct alignment, suitable lubrication or anti-seize and controlled installation practices can reduce risk. Follow application-specific torque guidance.

Need help selecting a metric fastener?

Metric Screw & Tool Company stocks DIN, ISO, JIS and MST metric fasteners for industrial maintenance, repair and manufacturing. Search the product categories or contact us with the specification, size, material, finish and quantity you need.

 
 
 

Recent Posts

See All
Metric Thread Pitch Chart and Selection Guide

Metric threads are identified by nominal diameter and pitch. M8 X 1.25 X 30 means an 8 mm nominal diameter, a 1.25 mm distance between thread crests and a 30 mm fastener length.

 
 
 
DIN to ISO Metric Fastener Equivalency Guide

Use this guide as a starting point when replacing a DIN fastener with an ISO specification. Dimensional differences can exist even when two standards describe a similar fastener, so verify the drawing

 
 
 

Comments


bottom of page