Metric Fastener Technical Guide: DIN, ISO, JIS & MST

Metric Screw & Tool supplies metric fasteners, industrial hardware and tools for manufacturing, maintenance, repair and equipment assembly. This guide explains size notation, thread pitch, standards, materials, property classes, finishes, common screw styles and identification.
Reading a metric fastener size
A designation such as M8 X 1.25 X 30 means an 8 mm nominal thread diameter, a 1.25 mm thread pitch and a 30 mm length. The capital X separates the three dimensions.
M8: nominal outside thread diameter of 8 millimeters.
1.25: distance in millimeters from one thread crest to the next.
30: fastener length in millimeters, measured from the correct head reference point.
How to measure metric screws and bolts
Use calipers for diameter and length and a metric thread-pitch gauge when possible. Measure most screws from beneath the head to the tip. Measure flat or countersunk heads overall because the head sits inside the countersink.
Coarse and fine metric threads
Coarse threads are the common default and are generally more tolerant of damage and contamination. Fine threads provide more adjustment per turn and can offer greater tensile stress area, but they require correct mating threads and careful identification.
DIN, ISO, JIS and MST standards
DIN, ISO and JIS designations define dimensions and other product requirements. MST references identify Metric Screw & Tool products and assortments. Similar standards are not automatically interchangeable; compare dimensions, tolerances, thread length, drive geometry, material and mechanical requirements.
Property classes and materials
Metric steel fasteners commonly use property classes such as 8.8, 10.9 and 12.9. Stainless products are commonly identified as A2 or A4. A higher class is not automatically a safe substitute because joint design, engagement, temperature, corrosion and mating materials also matter.
8.8: common medium-strength structural and machinery applications.
10.9: higher-strength machinery and automotive applications.
12.9: high-strength socket screws and tooling applications.
A2 stainless: general corrosion resistance.
A4 stainless: improved resistance in marine, chloride and chemical environments.
Finishes and corrosion protection
Zinc plating improves atmospheric corrosion resistance.
Black oxide provides a dark appearance and mild protection when oiled.
Plain steel has no protective plating.
Stainless steel resists corrosion but can gall; clean threads, suitable lubrication and controlled installation speed help reduce seizure.
Socket screws and set-screw points
DIN 912 / ISO 4762 is the common cylindrical socket-head cap screw. DIN 7984 and DIN 6912 are low-head styles, DIN 7991 / ISO 10642 is countersunk, and ISO 7380 is a button-head style.
Flat point — DIN 913 / ISO 4026: adjustment with limited marking.
Cone point — DIN 914 / ISO 4027: positive location.
Dog point — DIN 915 / ISO 4028: engagement with a hole, slot or keyway.
Cup point — DIN 916 / ISO 4029: general holding applications.
Torque considerations
Torque produces clamp load indirectly and much of the input is consumed by friction. Size, pitch, property class, plating, lubrication and joint design can change the correct value. Use a specification matching the exact fastener and lubrication condition. Critical structural, automotive, pressure and lifting joints should be reviewed by a qualified engineer.
Fastener identification checklist
Identify the head style and drive.
Measure nominal diameter and thread pitch.
Measure length from the correct reference point.
Record head markings and property class.
Identify material and finish.
Compare the fastener with the suspected DIN, ISO, JIS or MST standard.
Confirm load, environment and mating-thread requirements.
Metric Fastener Answers
What does Metric Screw & Tool sell?
Metric Screw & Tool stocks more than 42,000 metric fasteners, industrial hardware items and tools, including bolts, socket screws, machine screws, set screws, nuts, washers, pins, retaining rings, threaded inserts, thread-repair products and cutting tools.
Which metric fastener standards can I search for?
You can search by common DIN, ISO and JIS standards, MST item references, product name, description, metric size or SKU.
How do I find the correct metric fastener?
Use the site search to enter a product type, DIN, ISO or JIS standard, size, description or SKU. Results lead to relevant product-category pages where you can compare materials, finishes and dimensions.
How do I measure a metric screw or bolt?
Measure the outside thread diameter in millimeters, determine the pitch from crest to crest, and measure length from the correct head reference point. Countersunk fasteners are generally measured overall; most other screws are measured from beneath the head.
Are DIN, ISO and JIS fasteners interchangeable?
Not automatically. Compare dimensions, thread length, head and drive geometry, tolerances, material, property class and application requirements before substituting one standard for another.
Which materials, property classes and finishes are available?
Common choices include alloy steel, carbon steel, A2 stainless, A4 stainless, zinc-plated steel, black oxide and plain steel. Availability depends on the fastener type, size and standard.
Can I order individual pieces, package quantities or assortments?
Availability varies by item. Many products are sold in package quantities, and assortment kits are available for frequently used metric sizes and styles.
Where can I find dimensions and technical information?
Use the product category pages, the standard directory, product descriptions and this guide. Contact Metric Screw & Tool when a drawing, exact dimension or substitution needs confirmation.
What does a $0.00 product price mean?
A zero price means the item requires a current quotation. Use Request a Quote or contact Metric Screw & Tool rather than treating $0.00 as a free item.
How are online orders shipped?
Standard website orders ship by USPS Priority Mail for $7.50 and are normally shipped the same business day when available. The posted website rate remains applicable until it is changed on the site.
What is the return policy?
Contact Metric Screw & Tool before returning an item. Eligible returns are generally subject to the posted return window and the product must be in acceptable condition. Special-order and altered products may have restrictions.
How can I request help or a quote?
Use the Contact page, the Request a Quote button on applicable products, or call 1-800-METRIC-1 with the standard, size, material, finish and quantity needed.
Where is Metric Screw & Tool located?
Metric Screw & Tool Company is located at 9 Lake Street, Wakefield, Massachusetts 01880, USA.


Comments